Configure eMule to fly

we all know eMule is one of the most reliable download platforms with the most results, many more even than tools like Torrent. And although the best feature of La Mula is its simplicity in use and configuration, the truth is that the standard configuration, that is the one included in the application, is not sufficient for a user who wants get the best performance from your eMule.

So that eMule offers us the maximum possible speed, and it also works stably, we have to do a finer configuration of its parameters, including options like ports, servers and more, all we will learn to do in this space. Yes you want eMule to fly, so we invite you to read the rest of the article, which will also be useful for solving any problem.

eMule faster

There is no doubt that the most frequently asked question among eMule users is How do I make my eMule faster? Unfortunately, the answer is to spend a lot of time setting up the app. until you find the right point where the performance agrees with the amount of results obtained.

The most important points to get the best performance of eMule are the opening of the ports and the configuration of the Windows Firewall, which depends on whether we get a High or Low ID, the servers, since the results are concentrated there, that is to say the videos, music or documents we want to download, and so on if we make a wrong choice, this can result in a very poor download speed, and finally the internal configuration of eMule, including the number of sources and files, as well as the number of maximum connections, among other parameters.

if we can correctly configure the aforementioned parameters of eMule, it is more likely that we will get high download and upload speedswhich obviously translates into full satisfaction.

How to configure eMule

There is no doubt that EMule servers are the key point to which we need to pay more attentionsince a bad selection of servers, or the inclusion of inactive or fake servers, can seriously affect the performance of eMule.

As we know, eMule servers are the only source from which the application gets the results download the music, videos or applications we want to download. This is why a correct choice of servers is essential for obtaining good download results.

At this point we must pay particular attention, since there are sites that offer updated servers for eMule, that if we make the mistake of using them and loading them into eMule, we will most likely end up with our computer plagued with viruses and fake files.

Faced with this problem, the best thing we can do is to use a secure updated list of servers, ie they contain reliable servers for eMule and in good condition, since they will guarantee us a relaxed and, why not, fun download experience. If you are unsure where to get secure servers for eMule, it is better to access the ADSLZone forums, that there you will find a list of safe servers that can be used with confidence.

If you want to know how to manage servers in eMule, We recommend that you read this article, where you will find a lot of information on the subject, including how to manually add eMule servers.

Another consideration to consider is the emule version we are using as it plays a very important role in performance. Although eMule does not stand out for a very large update history, since it doesn't even need it, because it works very well, the truth is that having the latest version of eMule available will save us headaches, as installing the latest version of eMule will ensure that all known bugs and issues have been fixed.

At the moment, the most recent version of eMule is 0.50a, which we can find for free by clicking on this link. It should be noted that we must avoid any kind of website that offers more modern versions of this one, as they are not official, and they most likely contain viruses or other threats.

Another point to which we must pay particular attention to the doors of eMule, since the download speed we will get depends on its correct configuration. At this point we are talking about the famous High ID, that haunts eMule users so much. have one High ID, must make sure our router ports are open for eMule and Windows Firewall is configured correctly.

After checking the points mentioned above, it's time to do it configure eMule. Fortunately this is a simple task based on the following tutorial.

How to configure eMule step by step

Step 1: In case we don't have the latest version of eMule installed on our PC, or we don't have eMule directly, we can get the current version by clicking on this link.

Step 2: Once downloaded, we start with the installation, paying particular attention to the wizard, since during its execution it will ask us questions that will be translated later in a better performance of eMule.

Step 3: One of the first things that eMule will ask us concerns the ffunctions to share eMule. While this has nothing to do with performance, the truth is it will allow us to have better control how eMule will be used when the PC is shared by multiple users.

In this section we can choose between each eMule user with their own configuration or all PC users who use a single eMule configuration. The safest and easiest method is to use the option "User specific", since with this option activated it is guaranteed that each user can use eMule as he wants, ie you have the option to do your own configuration regarding download locations and more.

Step 4: After these steps, Windows will ask us if it should eMule block. Obviously we have to indicate that no, which we can do by clicking on the button "To allow".

Step 5: Next, it's time to add an alias, which will allow other eMule users to customize us. This alias can be any name, or we can also leave what is provided by default.

Step 6: From this point, we will be able to do it configure eMule ports, one of the main elements on which the final download speed of eMule will depend. The doors we need to make sure we open to download eMule without problems are the TCP and UDP ports.

It should be noted that we can use the default values ​​if we wish. One feature that we can use, if our router is compatible, is the option "Use UPnP to forward ports" which allows us to open these doors without having to do it manually.

Step 7: When we have finished opening the UDP and TCP ports of eMule, we will go to another configuration window, in which we must select upload and download priorities.

Step 8: The next step is very important, as we will be offered, through a method, the possibility of avoid some restrictions imposed by ISPs (Internet Service Providers) when using eMule. This method is called "Protocol obfuscation". If we want to skip these restrictions, the best we can do is click on the checkbox.

Step 9: The next step is to select the networks that eMule will use for the download. These networks are "ed2k" and "Kad". In this window, we can leave the default settings intact.

Once we're done with the wizard, we can make a small finer adjustment of the eMule options. To do this, we follow the detailed instructions below.

Step 1: We run eMule and click on the icon "Preferences". Next we move on to the option "Connection", field in which we can indicate to eMule the bandwidth of the connection to use. For tell eMule to use the entire connection, i.e. without imposing limits, clear the checkboxes in the section "Borders". We can leave the other values ​​on the screen as they are, i.e. leave both fields "0", which means that There will be no download or upload limit.

Step 2: Another one of the key pieces for eMule works correctly they are the servers, that's why we have to dedicate a few moments to them. For configure an eMule server, click on "Server" in the left panel. There we will activate the box next to the option "Refresh server list on startup" and the box "Refresh the server list when connecting to a server". With this, we will ensure that we will always connect to safe and functioning servers.

Step 3: The last thing left to do is configure the download destination, paying particular attention to the folders that we will share with other eMule users on the network, since the more files we share, the better it will be for us to download what we want.

To configure the eMule download location, all we have to do is click on the section "Lists", located to the left of the interface. down there "Shared directories" we will find the way to the folder we want to share, we just have to click on the checkbox next to it.

It should be noted that we must be careful with the folders we share, since if they are available, all users of eMule will be able to download the content on their computers.